Preventing Sewage Backup
Four Ways To Prevent Future Sewage Backups
A sewer backup at your home is never fun. It is even less enjoyable when it leads to storm damage at your Etowah, NC, home. If you have been suffering through a lot of these backups, it may be time for you to find ways to prevent them from happening again. Here are four actions you can take to prevent future sewage backups.
1. Install a Backwater Valve
Backwater valves are a very common solution to backups. They are designed to help sewage flow away from your house - but they also close if a backup is imminent. Remember that a certified contractor must install such a valve.
2. Use a Standpipe
A standpipe is a simple sewage solution - it is a pipe that is installed right in your floor drain. What makes it unique is that it has a rubber seal that is airtight, so any water that comes out of your drain is usually directed to the pipe rather than the floor. You can also remove the pipe after flooding is no longer an issue, and the remaining water will then drain.
3. Consider a Floor Drain Plug
These plugs are installed below your floor drain grates. They prevent water from backing up when sewage conditions are poor, letting the water return through its opening after the sewers calm down. They are typically very affordable and easy to install.
4. Buy an Overhead Sewer
Did you know that overhead sewer exists? They tend to be a less popular option due to their high cost, but they are highly effective. A professional must install this flood prevention tool.
Remember that even when you take preventative action against sewage backup, sewer cleaning and other upkeep are still important for a better chance of protecting your home. If you are already suffering from water-related destruction, contact a local residential storm damage company for remediation assistance.